NOTES FROM THE BENCH

Clock Repair Archive - -     Suspension Repair:

To put a hole in a suspension spring: use a sharp punch with an aluminum block on the bottom of the spring. Strike the suspension spring using the punch and a small hammer. The punch must be sharp and harder than the suspension spring. The aluminum will be hard enough to keep the spring from cracking , yet soft enough to allow the punch to put a small hole in the spring material that can then be enlarged with a 5 sided reamer.


Back to Notes From The Bench index

Page by: Perpetual PC's
Copyright (c) 2002 David Tarsi. Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.1 or any later version published by the Free Software Foundation; with the Invariant Sections being no invariant sections, with the Front-Cover Texts being no Front-Cover Texts, and with the Back-Cover Texts being no Back-Cover Texts. A copy of the license is included in the section entitled "GNU Free Documentation License".

The content of this website and journal has been prepared to provide information on the authors experience. The information is not a complete source. Use at your own risk. Any advice given by the author also is covered by this statement. This website and journal is not endorsed by any manufacturers mentioned. This website and journal has no connection whatsoever to any of the manufacturers mentioned. Your use of this information and your use of any advice given by the author is your acceptance of responsibility for all consequenses resulting in such use. No legal liability attaches to the author, the website, or the isp for any inaccurate or misleading information contained on the website and journal at any time or for the consequences of any errors or omissions or for the use of said information. However if written notice is given to the webmaster of inaccuracies or omissions, the author will endeavor to establish the factual position and where necessary correct the content of the website and journal in an appropriate and timely manner.