Perpetual PC's

Web Site Design.       Networks.

Commands and references ( GNU / linux kernel 2.4.18-3 and 2.4.18-14 )   
Linux is a registered trademark of Linus Torvalds


The commands with their most common usage are in brackets like this: [ command ].
Don't type the brackets, just what is inside of them.

Back to the index page


MORE(1)                   BSD General Commands Manual                  MORE(1)

NAME
     more - file perusal filter for crt viewing

SYNOPSIS
     more [-dlfpcsu] [-num] [+/ pattern] [+ linenum] [file ...]

DESCRIPTION
     More is a filter for paging through text one screenful at a time.  This
     version is especially primitve.  Users should realize that less(1) pro-
     vides more(1) emulation and extensive enhancements.

OPTIONS
     Command line options are described below.  Options are also taken from
     the environment variable MORE (make sure to precede them with a dash
     (``-``)) but command line options will override them.

     -num  This option specifies an integer which is the screen size (in
           lines).

     -d    more will prompt the user with the message "[Press space to con-
           tinue, `q` to quit.]" and will display "[Press `h` for instruc-
           tions.]" instead of ringing the bell when an illegal key is
           pressed.

     -l    more usually treats ^L (form feed) as a special character, and will
           pause after any line that contains a form feed.  The -l option will
           prevent this behavior.

     -f    Causes more to count logical, rather than screen lines (i.e., long
           lines are not folded).

     -p    Do not scroll.  Instead, clear the whole screen and then display
           the text.

     -c    Do not scroll.  Instead, paint each screen from the top, clearing
           the remainder of each line as it is displayed.

     -s    Squeeze multiple blank lines into one.

     -u    Suppress underlining.

     +/    The +/ option specifies a string that will be searched for before
           each file is displayed.

     +num  Start at line number num.

COMMANDS
     Interactive commands for more are based on vi(1).  Some commands may be
     preceded by a decimal number, called k in the descriptions below.  In the
     following descriptions, ^X means control-X.

     h or ?      Help: display a summary of these commands.  If you forget all
                 the other commands, remember this one.

     SPACE       Display next k lines of text.  Defaults to current screen
                 size.

     z           Display next k lines of text.  Defaults to current screen
                 size.  Argument becomes new default.

     RETURN      Display next k lines of text.  Defaults to 1.  Argument
                 becomes new default.

     d or ^D     Scroll k lines.  Default is current scroll size, initially
                 11.  Argument becomes new default.

     q or Q or INTERRUPT
                 Exit.

     s           Skip forward k lines of text.  Defaults to 1.

     f           Skip forward k screenfuls of text.  Defaults to 1.

     b or ^B     Skip backwards k screenfuls of text.  Defaults to 1.  Only
                 works with files, not pipes.

     `                 Go to place where previous search started.

     =           Display current line number.

     /pattern    Search for kth occurrence of regular expression.  Defaults to
                 1.

     n           Search for kth occurrence of last r.e.  Defaults to 1.

     !(cmd) or :!(cmd)
                 Execute (cmd) in a subshell

     v           Start up an editor at current line.  The editor is taken from
                 the environment variable VISUAL if defined, or EDITOR if
                 VISUAL is not defined, or defaults to "vi" if neither VISUAL
                 nor EDITOR is defined.

     ^L          Redraw screen

     :n          Go to kth next file.  Defaults to 1.

     :p          Go to kth previous file.  Defaults to 1.

     :f          Display current file name and line number

     .           Repeat previous command

ENVIRONMENT
     More utilizes the following environment variables, if they exist:

     MORE        This variable may be set with favored options to more.

     SHELL       Current shell in use (normally set by the shell at login
                 time).

     TERM        Specifies terminal type, used by more to get the terminal
                 characteristics necessary to manipulate the screen.

SEE ALSO
     vi(1) less(1)

AUTHORS
     Eric Shienbrood, UC Berkeley
     Modified by Geoff Peck, UCB to add underlining, single spacing
     Modified by John Foderaro, UCB to add -c and MORE environment variable

HISTORY
     The more command appeared in 3.0BSD.  This man page documents more ver-
     sion 5.19 (Berkeley 6/29/88), which is currently in use in the Linux com-
     munity.  Documentation was produced using several other versions of the
     man page, and extensive inspection of the source code.

Linux 0.98                     December 25, 1992                    Linux 0.98



Perpetual PC's home page

Perpetual PC's link page