Clock Repair Archive - -     Sessions Inlay No 6:

The pendulum length is 6.5 inches from regulator tab to the bottom of the pendulum bob plus 3/8 inch travel on the regulator ( the total effective length when the clock is keeping time is 6.5 inches ) ; the minute hand can be turned backwards ; to make the clock run faster turn the regulator to the left to make it run slower turn the regulator to right 1 turn of the regulator = approximately 5 .5 minutes in 24 hours ; the regulator shaft takes a number 3 size key the spring arbors take a number 6 key which fits quite snugly.

Back to Notes From The Bench index

Page by: Perpetual PC's
Copyright (c) 2002 David Tarsi. Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.1 or any later version published by the Free Software Foundation; with the Invariant Sections being no invariant sections, with the Front-Cover Texts being no Front-Cover Texts, and with the Back-Cover Texts being no Back-Cover Texts. A copy of the license is included in the section entitled "GNU Free Documentation License".

The content of this website and journal has been prepared to provide information on the authors experience. The information is not a complete source. Use at your own risk. Any advice given by the author also is covered by this statement. This website and journal is not endorsed by any manufacturers mentioned. This website and journal has no connection whatsoever to any of the manufacturers mentioned. Your use of this information and your use of any advice given by the author is your acceptance of responsibility for all consequenses resulting in such use. No legal liability attaches to the author, the website, or the isp for any inaccurate or misleading information contained on the website and journal at any time or for the consequences of any errors or omissions or for the use of said information. However if written notice is given to the webmaster of inaccuracies or omissions, the author will endeavor to establish the factual position and where necessary correct the content of the website and journal in an appropriate and timely manner.